2024 Toro ProLine H800 Series 50” (127 cm) (31051)

Information

2024 Toro ProLine H800 Series 50” (127 cm) (31051)

The Toro ProLine H800 direct collect rotary mower with high-lift dump mechanism wasengineered for unmatched collection performance and lowest total cost of operation andownership. Featuring a powerful Yanmar® 24.7 hp (18.4 kW) diesel engine; fast groundspeedup to 9.3 mph (15km/h); our innovative Smart Airflow direct collection design; and 77” (1.95 m)high-lift system that dumps clippings directly into truck beds or trailers, and you can quicklysee the ProLine H800 has no equal when comparing overall collection performance andproductivity. The ProLine H800 also runs longer without stopping, due to its large 10.8-gallon(41 liter) fuel tank, automatic deck cleaning wipers that prevent the chute from plugging, andinnovative sensor technology that automatically shuts off the mowing deck when the hopperis filled. Packed with productivity enhancing features, the ProLine H800 can mow, collectand dispose of up to 3 acres (12,000 m2) of material per hour!

Features may include:

Less Downtime with High-Volume Hopper
  • Equipped with a high-volume 1 cubic yard/214 gallon (810L) hopper with 77” (195cm) maximum dump height for easy clean-up of clippings.
Direct Grass Collection with Smart AirFlow™ System
  • Direct grass collection with Smart AirFlow system to maximizes collection performance. The adjustable full hopper sensor with automatic deck shut off to prevent overfilling and depending on grass conditions, it optimizes filling capacity.
High Capacity Cutting Deck
  • Productive and versatile 50” (1.3m) cutting/collection deck
Unmatched Productivity
  • Get more done with a 25 hp Yanmar® 3-cylinder liquid-cooled diesel engine and permanent hydrostatic Cross-Trax 4WD with differential-lock and automatic traction assist.
Quick Height of Cut Adjustment
  • 0.8”–4.3” (20–109mm) electric height of cut adjustment switch (from seat)

Photos

Highlights

  • Dalhousie Junction, New Brunswick
  • 2024
  • Toro
  • ProLine H800 Series 50” (127 cm) (31051)
  • Diesel
  • Available
  • ROPS up: 207 cm (81.5") | ROPS down: 166 cm (65.4") | of Cut: Infinitely variable between 1" - 4.3" (25 mm - 110 mm) | Max Dump: 1950 mm (76.8") with 300 mm overhang | Max Slope Angle: 12 degrees

Specifications

  • 2024
  • Toro
  • ProLine H800 Series
  • 50” (127 cm) (31051)
  • Riding
  • Yanmar®
  • 3-cylinder
  • 24.7 hp (18.4 kW) @ 3000 rpm | Gross: 24.7 hp (18.4 kW) @ 3000 rpm
  • 1.266 liter.
  • Liquid Cooled
  • Key Start
  • Remote-mounted 5" (12.7 cm) Virgis® air filter. 2-stage air cleaner with replaceable primary and safety elements.
  • Rear axle with hydraulic steering. Adjustable tilt steering wheel with 22/3 turns lock to lock.
  • 4WD
  • Diesel
  • Clutch: Belt-driven, Ogura electromagnetic clutch, with magnetic blade brake, powering drive shaft to gearbox on deck. Deck shuts off automatically when grass collector is full.
  • 12V
  • 12-volt battery, 55 amp alternator with P-terminal
  • 23" x 10.5" - 12" Turf Tire
  • 18" x 7.5" - 8", Turf Tire
  • 1.41 kg/cm2 (20 psi), depending on turf conditions
  • Mowing Rate (Productivity): Up to 3 acres/hr (1.21 hectacres/hr)
  • Ground Forward / Reverse: 0 - 9.3 mph (0 - 15 km/h) / 0 - 6.2 mph (0 - 10 km/h) | Mowing: 0 - 9.3 mph (0 - 15 km/h)
  • Formed and welded tubular steel chassis
  • ROPS up: 207 cm (81.5") | ROPS down: 166 cm (65.4") | of Cut: Infinitely variable between 1" - 4.3" (25 mm - 110 mm) | Max Dump: 1950 mm (76.8") with 300 mm overhang | Max Slope Angle: 12 degrees
  • 291 cm (114.6") (deck down)
  • 143 cm (56.3")
  • 119 cm (46.9")
  • 49.6" (126 cm)
  • 10.8 U.S. gal. (40.9 L)
  • 2.5 U.S. gal. (9.5 L)
  • Collection System: 810 litre (214 gallons / 1 cu. yd.)
  • with Cutting Deck: 980 kg (2,160 lbs.) | without Cutting Deck: 810 kg (1,786 lbs.)
  • Blade Style/Type: Rotary | Number of Blades: 5 | Interlocks: Cutting unit drive disengages when operator leaves seat. Engine starts only when forward / reverse pedal is in neutral, the parking brake is applied and PTO disengaged. | Cutting Unit Type/Configuration: Two heat-treated blade segments per spindle, bolted to integral fan disc. Single pilot blade for the overlap between the two main blade assemblies.
  • Formed and welded deck with front bull-nose bumper
  • Description: Side mounted radiator with automatic reverse function
  • Mechanical suspension Grammer seat, fore/aft and back rest adjustment, retractable seat belt, operator weight adjustment.